AIVO ANCP3005Q AVYCON HIGH POWER INDOOR/OUTDOOR CPE 5.8GHz UP TO 300Mbps

AIVO ANCP3005Q AVYCON HIGH POWER INDOOR/OUTDOOR CPE 5.8GHz UP TO 300Mbps

Highly recommended by Avenger Security team, way easier to configure than Ubiquity Point to Point, better chipet configuration. Send camera signals miles line of sight.

High Power Indoor/Outdoor CPE with Qualcomm® Atheros Chipset - Range up to 6 miles away with line of sight
Can be used to connect remote IP cameras to existing NVR’s / DVR’s - Supports up to 300Mbps
Utilizes the 5.8Ghz Wi-Fi frequency, avoiding the congested 2.4Ghz bandwidth in use on most Wi-Fi today.
Dual 14dBi antennas
Supports the following operation modes: Bridge, Access Point, Router and Repeater
Supports providing PoE power to a single IP camera attached to CPE
Includes 48V PoE power injector which allows for powering CPE from up to 330ft. away
LEDs provide information about system status and signal strength for alignment in Bridge mode
Hardware Reset button
Outdoor Rated down to -40°F
Supports Pole, Wall or Rack Mounting

Specifications

Description	ANCP3005Q
CPU	Qualcomm AR9344 560Mhz CPU SE2576L PA Chipset – 64MB DDR2 / 16MB SPI
Antenna	Integrated Dual 14dBi Antennas
Wi-Fi Standards	IEEE802.11a/an
RF Output Power	200mW (23dBm)
RF Sensitivity	-96dBm
RF Frequency	802.11a/n: 5.180Ghz – 5.825Ghz
Bandwidth	300Mbps
Physical Ports	1 x 10/100 Mbps WAN Ethernet Port 1 x 10/100 Mbps LAN Ethernet Port 1 x Toggle switch for PoE output for IPC 1 x Reset Button
LED Indicators	Power / WAN / LAN / Wi-Fi Level Signal Strength
Power	PoE 802.3at/af Adapter: 48V PoE Power Adapter
Power consumption	<8W
Installation Methods	Pole Mounting, Wall Mounting or Rack Mounting
Product Dimensions	10.2” x 3.1” x 2.1” (262mm x 80mm x 53mm)
Net weight	0.7lbs
Working Environment	-40˚F ~ 131˚F / 10% ~ 90% RH, Non-condensing
Storage Environment	-58˚F ~ 167˚F / 5% ~ 90% RH, Non-condensing